Extron Electronics MAV 62 - Manual (Page 17)

MAV 62 Matrix Switcher • Specifications
Specifications, cont’d
MAV 62 Matrix Switcher • Specifications
Specifications
Video
Routing .......................................... 6 x 2 matrix
Gain ............................................... Unity
Bandwidth .................................... 150 MHz (-3dB), fully loaded
0 - 10 MHz ................. no more than 0.1dB
to -0.1dB
0 - 30 MHz ................. no more than 0.5dB
to -0.5dB
Phase between I/Os .................... <1.28º at 3.58 MHz
Differential phase error .............. 0.1% at 3.58 MHz and 4.43 MHz
Differential gain error ................. 0.1º at 3.58 MHz and 4.43 MHz
Max. propagation of delay ......... 5 ns typical (±1 ns)
Crosstalk ....................................... -50dB @ 5 MHz
Switching speed ........................... 200 ns (max.)
Video input
Number/signal type
MAV 62 Composite Video 6 composite video
MAV 62 S-video ............... 6 S-video
Connectors
MAV 62 Composite Video 6 BNC female
MAV 62 S-video ............... (6) 4-pin mini DIN female
Nominal level ............................... 1V p-p for S-video, and for composite video
0.3V p-p for C of S-video
Minimum/maximum levels ...... Analog: 0.5V to 2.0V p-p with no offset
Impedance .................................... 75 ohms
Return loss .................................... <-30dB @ 5 MHz
Maximum DC offset .................... 1.5V
External sync (genlock) ............... 0.3V to 0.4V p-p
Video output
Number/signal type
MAV 62 Composite Video 2 composite video
MAV 62 S-video ............... 2 S-video
Connectors
MAV 62 Composite Video 2 BNC female
MAV 62 S-video ............... (2) 4-pin mini DIN female
Nominal level ............................... 1V p-p for S-video, and for composite video
0.3V p-p for C of S-video
Minimum/maximum levels ...... 0.5V to 2V p-p
Impedance .................................... 75 ohms
Return loss .................................... -30dB @ 5 MHz
A-2
DC offset ....................................... ±5mV maximum with input at 0 offset
Switching type ............................. Vertical interval
Sync
Genlock connectors ..................... 2 BNC female
Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Audio
Routing .......................................... 6 x 2 stereo matrix
Gain ............................................... Unbalanced output: 0dB; balanced output:
+6dB
Frequency response ..................... 20 Hz to 20 kHz, ±0.05dB
THD + Noise ................................ 0.03% @ 1 kHz at rated nominal level
S/N ................................................ >90dB, output 21dBu, balanced, at rated
maximum output
Crosstalk ....................................... <-80dB @ 1 kHz, fully loaded
Stereo channel separation .......... >80dB @ 1 kHz
CMRR ............................................ >75dB @ 20 Hz to 20 kHz
Audio input
Number/signal type ................... 6 stereo, balanced/unbalanced
Connectors .................................... (6) 3.5 mm captive screw connectors, 5
pole
Impedance .................................... >10 kohms unbalanced/balanced, DC
coupled
Nominal level ............................... -10dBV (316mV)
Maximum level ............................ +19.5dBu, (balanced or unbalanced) at
1%THD+N
Input gain adjustment ................. -15dB to +9dB, adjustable per input via
RS-232/422 or front panel
Audio output
Number/signal type ................... 2 stereo, balanced/unbalanced
Connectors .................................... (2) 3.5 mm captive screw connectors, 5
pole
Impedance .................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ...................................... ±0.1dB channel to channel
Maximum level (Hi-Z) ................ >+21dBu, balanced or unbalanced at
stated %THD+N
Maximum level (600 ohm) ......... >+15dBm, balanced or unbalanced at
stated %THD+N
0dBu = 0.775 volts (RMS).
A-3