EverFocus EDR-920 - Manual (Page 20)

10
1.5 Monitor Display
1. Channel tag
2. Event sign
3. Select sign
4. Play status bar
5. Record status bar
The status information of the cameras or machine will show up, and be located at
different places on the screen.
2. Event sign: Event signals which are small icons with a capital letter and red
background show the events on each screen. There are a total of 6 different signals:
Alarm event. In order to show the camera video to a corresponding alarm,
setting a FOCUS CAMERA in ALARM SETUP MENU is necessary.
Motion event. Motion event only shows up when the camera’s MOTION is
enabled in MOTION SETUP MENU, and the camera detects a motion.
Video loss event. Video loss event only shows when the camera’s
VIDEOLOSS is enabled in VIDEOLOSS SETUP MENU, and the
camera signal is lost.
Sequence sign. Sequence sign shows up when the display is in the sequence
mode. The last display on the screen has a “*” sign in the top-middle. The
sign will replace the “*” in the display when sequence occurs.
Note: Sequence is invalid when all cameras are showing.
M
A
V
S
1. Channel tag: A channel tag indicates the channel name of the screen.
S