EverFocus EDR-920 - Manual (Page 21)

11
Temperature indication. This shows if the hard drive’s temperature is overheated.
Overheat is determined in HDD TEMPERATURE of WARNING SETUP
MENU.
Fan fail indication. This shows when the fan fails to work normally. If you get this
warning, contact technical support for assistance.
3. Select sign: You can assign a camera to a display by pressing SELECT key in live mode.
Dial Jog to move the select sign to the display you would like to change camera, and then press
channel key on the front panel to choose that channel. Press SELECT again to exit from this
mode.
4. Play status bar: The play status bar appears in play back mode if you enable a status bar on
the screen (Please see DISPLAY, 8
th
item of Front Panel Keypads). There are three parts that
will be shown: play date, play status, and play time.
Play date
The date on which the video was recorded.
Play status
“PAUSE”, when the video playback is paused.
“P## >” means normal play speed on the displayed disk number;
“P## <“ means normal reverse play speed on the displayed disk number;
“>> x N” means N time fast play speed;
“<< x N” means N time fast reverse play speed.
Play time
The play time at which the video is recorded. The time format depends on the time
format setting in the TIME/DATE SETUP MENU.
5. Record status bar
The record status bar appears when you enable a status bar on the screen.
Play Date Play Status Play Time
Current Date Record Status Event Current Time Audio Ch
HDD/Fan Status
T
F