Ericsson M-PATM SERIES LBI-38377E - Manual (Page 29)

REMOVING THE BATTERY PACK
1. Ensure the ON/OFF SWITCH on the battery
pack is in the off position.
2. Press down on the battery release latch and
slide the battery pack out in the direction of
the release latch. See Figure 9.
CHARGING THE BATTERY PACKS
After receiving a new rechargeable battery pack
from the factory, it should be fully charged before
placing it into service. This also applies to recharge-
able batteries that have been stored for long periods.
When the battery pack requires charging the radio
will signal the operator with an alert tone and the
"BAT" status flag will turn on.
Figure 8 - Installing the Battery Pack
Figure 9 - Removing the Battery Pack
29