EnGenius Technologies EOA7530 - Manual (Page 54)

previous settings.
7.4 PPTP (Point‐to‐Point Tunneling Protocol)
Select PPTP as your WAN connection type if your ISP uses a Point‐to‐Point‐Tunneling Protocol (PPTP)
connection. There are two WAN interface types you can select: Dynamic IP Address and Static IP
address. Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server
addresses. In most cases, select Dynamic.
Dynamic IP Address
WAN Interface Type Select Dynamic IP Address as your WAN Interface.
Hostname Specify the Hostname is given by your Internet Service Provider.
Static IP Address
WAN Interface Type Select Static IP Address as your WAN Interface.
IP Address Specify the static IP address for the EOA7530 WAN Interface.
IP Subnet Mask Specify the WAN subnet mask.
EOA7530 IP Address Specify the EOA7530 WAN IP address.
53