EnGenius Technologies EOA7530 - Manual (Page 8)

Chapter 2 Hardware Overview
The following figures show the key components on the EOA7530.
2.1 Bottom View
The bottom panel of the EOA7530 contains an RJ‐45 port and a Reset button.
‐ The RJ‐45 port connects to an Ethernet adapter in a computer you use to configure the EOA7530.
For more information, see Chapter 4.
‐ The Reset button can be used to reboot the EOA7530 and return the device to its default factory
configuration, erasing any overrides you may have made to the device’s default settings. The
Reset button is recessed to prevent accidental resets. To reboot the EOA7520, use a flat object
such as a pencil to press the Reset button for approximately 10 seconds and then stop pressing
the Reset button.
7