Extron electronic IPI 100 Series - Manual (Page 49)

IPI 100 Series, IPI 200 Series • Configuration and Control 4-17
3 . Add intercoms to the intercom list and click Update
Intercom List .
4 . Configure each intercom and click Apply. See the
“Configuration” section in this chapter for details.
5 . Exit the configuration utility. The main screen is now
accessible.
6 . Click on the Tools drop-down menu and select
Preferences .
7 . Select the desired settings for the system, then click OK
to accept the settings and return to the main screen. See
“Setting preferences” on page 4-13.
8 . Click on the File menu and select Save Project or Save
Project As , then create a filename for and save the system
settings.
9 . Manage the intercom system using the main/management
screen. See “Parts of the Main Screen” on page 4-5.
Parts of the Configuration Utility screen
a
Configuration Utility menu bar — See “Configuration Utility
menus” on page 4-8 for details on the drop-down menus
available here.