Epson CD5220 - Manual (Page 16)

CD5220 customer display
Command Code description
(hex) Function description
CLR 0C clear display screen , and clear
string mode
CAN 18 clear cursor line, and clear
string mode
ESC * n 1B 2A n
1<=n<=4 brightness adjustment
ESC & s n m
[a (p1..pa)]x
(m-n+1) 1B 26 1 n m
[a(p1..pa)]x (m-n+1)
20<n<=m<=FF define download characters.
a=1-5
p1..p5 =row1..row5
ESC ? 1B 3F delete download characters.
ESC % 1B 25 select/cancel download
character set.
ESC _ n 1B 5F n
n=0,1 set cursor ON/OFF
ESC f n 1B 66 n select international fonts set
ESC c n 1B 63 n select fonts ,ASCII code or JIS
code
ESC = n 1B 3D n
n=1,2,3,31,32,33 select peripheral device, Display
or Printer
ESC s 1 1B 73 01 store the use define character
into EEPROM
ESC d 1 1B 64 01 store the use define character
from EEPROM
Table 6-1
(REMARK) * While using command "ESC QA" or "ESC QB", these two commands could
using combine with terminal printer -- TP 2688.or TP3688
* If using commands "ESC QA" or "ESC QB
,others commands can not be used except
using command "CLR" or "CAN" to change operating mode.
* If using commands "ESC QD
,upper line message move continuously, till receive a new
command, and clear upper line and move cursor to upper line left-most position.
Set international font set( Table 6-2) Select code table(Table
6-3)
n international font set n international font set n international font set
A U.S.A. N NORWAY A compliance with ASCII code