Charcoal filter, Changing the light bulb, Fig. 4 – Electrolux U30306 EFC650-950 User Manual

Page 39

Advertising
background image

39

Charcoal filter

• The charcoal filter should only be used if you

want to use the hood in the recirculation

function.

• To do this you will need an original charcoal

filter (available from your local Service Force

Centre).

• Replacing the charcoal filter

The charcoal filter cannot be washed nor

regenerated.

The charcoal filter should be replaced every 4

months under normal use.

Replacement filters are available from your

local Service Force Centre.

• Fitting - Fig. 4

Fit one charcoal filter on the left and one on the

right so to cover the plastic grids that protect the

fan wheel, then turn clockwise the central

handle of the charcoal filter.

• To remove proceed in the reverse order.

• Clean the inner housing using a hand hot

solution only(never use caustic detergents,

abrasive powders or brushes).

• Always specify the hood model code number

and serial number when ordering replacement

filters. This information is shown on the

registration plate located on the inside of the

unit.

• The charcoal filter can be ordered from your

local Service Force Centre.

Changing the light bulb

• Disconnect the cooker hood from the main

supply.

• Remove the lamp cover.

• Replace the old bulb with a new one of the

same type.

• Remount the lamp cover.

• If the light does not come on, make sure the

bulb has been inserted correctly before

contacting your local Service Force Centre.

Fig. 4

Advertising
This manual is related to the following products: