eMachines DUV1000 - Manual (Page 12)

DUV1000 User’s Guide
12
6 DUV1000 Configuration
DUV1000 voice menu helps you through the configuration process. You can enter the
configuration menu by pressing the key sequence ‘
∗123∗’ and terminate with a hash (#) key when
DUV1000 is in idle state.
DUV1000 will ask for password on entering configuration menu. Since the configuration
information contains valuable information it is password protected. If you don’t remember your
password, you can reset DUV1000 to default password as described in Loading factory defaults.
The default password is ‘12345’.
Warning: DUV1000 identifies end of a parameter by ‘#’. Please terminate each parameter entry
into DUV1000 by pressing ‘#’ key.
DUV1000 configuration menu is shown above. It has five options in the main menu and seven
options in the extended menu. Each of them is described below. The configurable parameters are
shown in bold letters. DUV1000 plays the current value of each parameter and allows you to edit
or skip to next parameter. After entering a parameters value, it plays it back for verification.
After password verification, DUV1000 will play the main menu as below.
“Press
‘1’ to enter ISP parameters,
‘2’ to enter calling card parameters,
‘3’ to enter extended menu,
‘4’ to review configuration parameters,
‘5’ to save & quit