eMachines DUV1000 - Manual (Page 16)

DUV1000 User’s Guide
16
If you change the language code, please do a software upgrade as described in Upgrading
Software section.
6.5.5 VoIP Service Provider
DUV1000 works with many service providers. Following is the list of service providers supported
with their respective codes.
Table 3 Service Providers
Service Provider Code
Default 0
VSNL 1
SatyamOnLine 2
Pioneer Online
3
If you enter other than the listed value, the phone prompts with a message “The parameter you
have entered is incorrect, Press ‘1’ to edit, ‘2’ to skip”. Choose appropriately.
If you change the service provider code, please do a software upgrade as described in Upgrading
Software section.
6.5.6 Software version number
This option plays the current software version in DUV1000. It will change if you download newer
version of software from Internet.
6.5.7 Volume Control
The volume level can vary depending on the VoIP gateway of your VoIP service provider. This
option allows configuration of volume levels for Internet (VoIP) and PSTN calls. DUV1000 has
separate volume control for Internet and PSTN calls. You can select a level in the range of 1 – 5
to adjust the volume level. The default values are 3 for VoIP calls and 3 for PSTN calls.
6.5.8 Review Configuration
This option plays current information for all parameters in extended menu as
“Configuration password is x
Software server address is x
Country Code is x
Language selected is x
VoIP Service provider is X
Current software version is x
VoIP volume level is x
PSTN volume level is x”
After playing this message, it prompts with the extended menu.
6.5.9 Exit to main menu
This option takes you to the main menu. You need to save the information entered in extended
menu by selecting ‘Save and Exit’ in main menu.