Efficient Networks 802.11g Turbo WLAN USB Adapter with RP-SMA Connector - Manual (Page 26)

21
Parameter Description
Wireless Mode 802.11 B/G mix – If you have a mix of 802.11b and 802.11g
wireless stations in your network, it is recommended to set the
adapter to this mode. This mode is also the default setting.
802.11 B only – This adapter can be compatible with both 802.11g
and 802.11b wireless stations. If there are only 802.11b wireless
stations in the network, you can set the adapter to this mode.
Ad Hoc Wireless Mode When the adapter is set in Ad Hoc (Peer to Peer Mode), you can
designate the wireless connection mode for the Ad Hoc network.
Only B – This adapter can be compatible with both 802.11g and
802.11b wireless stations. If there are only 802.11b wireless
stations in the network, you can set the adapter to this mode.
B/G Mixed – If you have a mix of 802.11b and 802.11g wireless
stations in your network, it is recommended to set the adapter to
this mode. This mode is also the default setting.
Only G – This adapter can be compatible with both 802.11g and
802.11b wireless stations. If there are only 802.11g wireless
stations in the network, you can set the adapter to this mode.
Select Your Country Region Code The available channel differs from different countries. For example:
USA (FCC) is channel 1-11, Europe (ETSI) is channel 1-13. The
operating frequency channel will be restricted to the country user
located before importing.
B/G Protection If you have a mix of 802.11b and 802.11g wireless stations in the
network, it is recommended to enable the protection mechanism.
This mechanism can decrease the rate of data collision between
802.11b and 802.11g wireless stations. When the protection mode
is enabled, the throughput of the adapter will be a little lower due to
many of frame traffic should be transmitted.
Auto – Based on the status of the network and automatically
disable/enable protection mode.
On – Always enable the protection mode.
Off – Always disable the protection mode.