Efficient Networks 802.11g Turbo WLAN USB Adapter with RP-SMA Connector - Manual (Page 29)

24
Parameter Description
WMM Enable Check on this item and click “Apply” to enable WMM function, and
then further you can configure WMM Power Save and Direct Link
Setup function.
WMM – Power Save Enable Check on this item to enable WMM Power Save function.
Click “Setting” to further configure WMM Power Save setting,
which includes: AC_BK, AC_BE, AC_VI and AC_VO.
Direct Link Setup Enable Check on this item and click “Apply” to enable DLS function.
Direct Link
Direct Link Setup
MAC Address Specify the MAC Address of the client adapter you want to direct
link to and click “Apply” to add into DLS Status table.
Timeout Value Specify the timeout value for the direct link you want to setup.
DLS Status The DLS Status displays all the direct link connections and you
can click “Tear Down” to stop any of them.
3.7 About
By choosing this option, you can click the hyperlink to connect the website for the information of the
wireless chipset vendor and review basic information about the Utility such as the Driver, Utility and
EEPROM Version. The MAC Address of the adapter is displayed in the screen as well.