Electrolux LAVAMAT 62610 - Manual (Page 14)

14
PREWASH
Hot pre-wash before the main wash that follows automatically; with
intermediate spin for
(COTTONS/LINEN) and (EASY-CARES),
without intermediate spin for (DELICATES).
STAIN
For heavily soiled or stained washing. In-wash stain treatments are
washed in at the optimum time as the programme progresses. Can only
be used for washing temperatures of above 40°C as stain removers are
not effective at lower temperatures.
Setting the delay timer
3
Using the button (DELAY TIMER) you can delay the start of a pro-
gramme by 30 minutes (30') to a maximum of 23 hours (23h).
1. Select the programme.
2. Press the
button (DELAY TIMER) repeatedly until the multi-display
shows the desired time delay, e. g., 12h, if the programme is to start in
12 hours. The
indicator (DELAY TIMER) will light up.
3
If the display is showing 23h and you press the button again, the time
delay will be cancelled. 0' will appear followed by the length of the
wash programme that has been set.
3. To activate the delay timer, press the button (START/PAUSE). The
time remaining to the start of the programme is continuously displayed
(e. g., 12h, 11h, 10h,... 30
'
etc.).
Starting a programme
1. Check that the tap is turned on.
2. Press the
button (START/PAUSE). The programme is started or it
starts after the time delay set has elapsed.
3
If after pressing the button (START/PAUSE) E40 flashes in the
multi-display, the (END) indicator flashes 4x and at the same time an
acoustic signal sounds 4x, the door has not been correctly shut. Push
the door firmly closed and press the
button (START/PAUSE) again.