Installation – Electrolux LAVAMAT 16810 User Manual

Page 52

Advertising
background image

The upright standpipe should have a mini-
mum length of 30 cm (12”) from the bottom
of the elbow to the top of the pipe (see dia-
gram). Make sure that it is designed in such a
way that the end of the drain hose cannot be
covered with water.

If you intend the drain hose from the machine
to empty into a sink, make sure that the sink
is empty and the plug hole is not blocked. Use
the plastic “U -Piece” supplied.

Important

Before connecting up the machine to new
pipework or to pipework that has not been used
for some time, run off a reasonable amount of water to flush out any debris
that may have collected in the pipes.

In the interest of the environment

Washing machines and dish-
washers should be connected
to the FOUL drainage system,
the water will then be taken
to a sewage works for treat-
ment before being discharged
safely into a river.
It is essential that these appli-
ances are not connected to the
surface water drainage system
as this water is discharged
directly into a river or stream
and may cause pollution.
If you require any further
advice please contact your local
water authority.

52

Installation

SHOWER

BATH

SINK TOILET

BIDET

WASHING

MACHINE DISHWASHER

RAINWATER

'RUN-OFF'

SURFACE WATER

DRAINS & SEWERS

UNTREATED

DISCHARGE

RIVER

FOUL DRAIN

FOUL SEWERS

SEWAGE

TREATMENT

WORKS

RIVER

TREATED

DISCHARGE

RAINWATER

'RUN-OFF'

SURFACE WATER

DRAINS & SEWERS

Min. 30 cm.(12")

38 mm.(1/ ") diameter

standpipe

1

2

132994040.qxd 1/22/03 9:16 AM Pagina 52 (Nero/Process Black pellicola)

Advertising
This manual is related to the following products: