Ei Electronics Carbon Monoxide Alarm Ei 205EN User Manual

Model ei205en co alarm, Product description, Operation

Advertising
background image

Shannon Free Zone, Shannon, Co. Clare, Ireland.

Ph.

+353 61 471277

Fx.

+353 61 471053

Email.

[email protected]

Web:

www.eielectronics.com

E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice

.

Ei205EN DataSht RevB


















































Model

Ei205EN CO Alarm

Proven sensor - based on electrochemical
technology

Memory feature records if CO has been detected

Easy to use Test/Hush button

Automatic self diagnostics

Loud distinct alarm (85 dBA at 3 meters)

Power and alarm indicator lights

Interconnect up to 12 units (model Ei205CEN
only)

Tamperproof

Fast CO test mode

Kitemarked to BS EN 50291:2001

2 Year guarantee


Product Description

The Ei205EN is a Carbon Monoxide (CO) alarm powered
by 3 x AA alkaline batteries. The CO alarm is housed in
an attractive slimline casing and can be easily secured to
a wall or ceiling

– the fittings are supplied

The 205EN CO alarm uses a proven electrochemical cell
type sensor which checks CO concentration every 50
seconds. All units are individually calibrated and tested in
CO gas in order to ensure accuracy

As well as being easy to install and maintain, the alarms
have a vitally important memory feature which records if
CO has been detected whilst the occupier was away

An easy to use Test/Hush button allows the user to
check that the horn and electronics are working and to
silence nuisance alarms












Operation

The green indicator will flash every minute to
indicate that the battery supply is working

The horn will sound and the red indicator will flash at
different speeds to indicate the presence of various
levels of CO gas

– slow flash indicating low levels

and rapid flash to indicate high levels

The horn will beep and the amber indicator flash
every minute to indicate a fault

The horn will beep and the green indicator flash
every minute to indicate that the batteries are
depleted

Memory Feature - when the test button is pressed
the horn will sound and the indicators flash as
follows to indicate CO has been previously detected:
green flash

– no CO, red flash twice every 2

seconds

– 50ppm detected, red flash four times

every 2 seconds

– 100ppm detected and red flash

eight times every 2 seconds

– 300ppm detected

Interconnect feature available on Ei205CEN only

BATTERY POWERED

Alkaline batteries (3 x AA)
supplied

Advertising