Eiki EIP-250 - Manual (Page 67)

65
Specifications
As a part of policy of continuous improvement, EIKI reserves the right to make design and
specification changes for product improvement without prior notice. The performance specifica-
tion figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
Model
Display devices
Resolution
Lens
Input terminals
Output terminals
Control, others
Speakers
Projection lamp
Rated voltage
Rated frequency
Input current
Power consumption (Standby)
Operation temperature
Cabinet
Dimensions (main body only) [W × H × D]
Weight (approx.)
F number
Zoom
Focus
DVI-I (Compatible with HDCP)
RGB/Component (mini D-sub 15 pin)
S-Video (mini DIN 4 pin)
Video (RCA)
Audio (ø3.5 mm stereo minijack)
Audio (RCA)
RGB/Component (mini D-sub 15 pin)
Audio (ø3.5 mm stereo minijack)
USB (Type B)
RS-232C (mini DIN 9 pin)
EIP-2600 EIP-250
0.55" DLP ® Chip
XGA (1024
×768)
SVGA (800
×600)
F 2.5 – 2.6
Manual,
×1.15 (f = 20.4 – 23.5 mm)
Manual
Ч1
–
Ч1
Ч1
Ч1
Ч1
–
Ч1 (L/R)
Ч1
Ч1 (variable audio output) –
Ч1
Ч1
2 W (Mono)
230 W 200W
AC 100 – 240 V
50/60 Hz
3.2 A 2.9 A
303 W (5.0 W) with AC 100 V 267 W (5.0 W) with AC 100 V
293 W (5.7 W) with AC 240 V 259 W (5.7 W) with AC 240 V
41
°F to 95°F (+5°C to +35°C)
Plastic
10 41 / 64 "
Ч 3 33 / 64 "
Ч 10 7 / 16 "
(270
Ч 89 Ч 265 mm)
6.4 lbs. (2.9 kg)
This EIKI projector uses a DLP ® chip. This very sophisticated panel contains 786,432
(EIP-2600)/480,000 (EIP-250) pixels (micromirrors). As with any high technology electronic
equipment such as large screen TVs, video systems and video cameras, there are certain
acceptable tolerances that the equipment must conform to.
This unit has some inactive pixels within acceptable tolerances which may result in inactive dots
on the picture screen. This will not affect the picture quality or the life expectancy of the unit.