Elmo EDR-X216 - Manual (Page 21)

Related Topics: Camera Setup | Sensor Setup | External Monitor
!/
 " '

)
)
%
The External Monitor Setup tab allows you to view specified cameras on an external monitor. Cameras are displayed in sequence
with a delay equal to the dwell time.
Figure 9. External Monitor
Dwell
Dwell refers to the interval (in seconds) between the display of each camera.
'
  !/
 "
To set up an external monitor, follow these steps:
1. Specify the Dwell time for the sequence.
2. Select the cameras you need in the sequence.
3. Click Save to save the setup settings.
Related Topics:Camera Setup | Sensor Setup | Control Setup
"


)
)
%
On the Motion Detection tab, you can define up to five target zones for motion detection on each camera. Additionally, you can
!/
 " '

13