Encore electronic ENXTV-X2 - Manual (Page 4)

Chapter 1: Introduction
The ENXTV-X2 is an excellent solution in combining a computer and a TV system without
the need for screw driver or software driver. Enhance your computer to a home theater
quality system adding a high quality TV receiver, just plug-in cables and power adapter.
The ENXTV-X2 provides high quality, high resolution of up to 1680x1050. Watch your
favorite TV program while using your computer at the same time or watch your favorite TV
program even your computer is turned-off
12
.
12
If the speaker cable is hooked up directly to the computer’s the PC sound card the audio will not work. The audio speaker cable
should be connected to the ENXTV-X2Audio-Out port when watching TV while the computer is turned off.
1.1 Package Contents
Please confirm the following parts are included when open the package. If not, please
contact your distributor or dealer.
z ENXTV-X2 External TV Tuner
z IR
Remote Control
z 2 pc. AAA Batteries (for remote controller)
z Switching
AC adapter
z VGA-In loop back cable (for PIP mode)
z 3.5 mm stereo Audio cable
z User’s
Manual
1.2 System Requirements
z Display unit CRT / LCD with Standard VGA connector (D-Sub 15 pin). A computer is
necessary when in PIP mode.
z RF antenna signal or CATV signal.
z Independent of OS (operating system), no software driver installation or HDD space is
needed.