Chapter 2: getting started, 1 rear panel connectors, 2 right side panel port connectors – Encore electronic ENXTV-X2 User Manual
Page 6: 2 right side panel connectors
Chapter 2: Getting Started
2.1 Rear panel connectors
ENXTV-X2 cable connection is easy. The most typical cable connections are shown in the picture
diagram below. Make sure the power cable is not connected when hooking these cables in.
CONNECTOR
TYPE
DESCRIPTION
DC In
5mm, INT+, EXT-
AC adapter, power in (5V, 2 A)
VGA Out
15 pin D-Sub
connector
ENXTV-X2 main video output. Connects to CRT/LCD
Monitor
VGA In
8pin Mini DIN
connector
VGA-In loop back cable
。The other end of this cable
connects to the PC’s VGA D-sub 15 pin connector.
Audio Out
3.5mm stereo
connector
Audio out connects to the speaker.
Audio In
3.5mm stereo
connector
Audio In Connect to PC sound system (Line-in of sound
card).
Video Out
RCA Jack
ENXTV-X2 Video output. Can be used to connect to Video
input of display unit
。
RF TV
antenna
connector
TV or CATV signal-in connector
2.2 Right Side Panel Port Connectors