EverFocus GIGABIT MANAGED ETHERNET SWITCH ESM316T002R - Manual (Page 55)

55
CHAPTER 5 Monitoring
Port Statistics Information
You can display standard statistics on network traffic passing through each port. This information can be used to
identify potential problems with the switch, such as a faulty port or unusually heavy loading. All values displayed
have been accumulated since the last system reboot.
Web Smart switch interface
To click Monitoring, Port Statistics to display port statistics.
Figure 42: Port Statistics Information
Hint§
The following parameters are shown on the Port Statistics Information page.
■ Port - The port number.
■ State - Display the link state of port interfaces (Enabled or Disabled).
■ Link Status - Display the link state of the port interface (Link Up or Link Down).
■ TxGoodPkt - The total number of packets transmitted out of the interface.
■ TxBadPkt - The total number of outbound packets that could not be transmitted because of errors.
■ RxGoodPkt - The total number of packets received on the interface.
■ RxBadPkt - The total number of inbound packets that contained errors preventing them from being
deliverable.
■ Clear - Click the button to reset all counters.