Operation – EdgeStar PAC8000S User Manual

Page 5

Advertising
background image

The power button controls the

power to the unit.

In the cooling mode, room air is cooled and hot

air is exhausted to the outside through the air

exhaust hose. Adjust the fan speed and

temperature to suit your desired comfort level.

Note: The air exhaust hose must be vented

through a window when using the cooling mode

(see the page titled Installation for more detail).

The dehumidifying mode removes water from the

air without cooling the room. If the room tempera-

ture is below 77ºF, the fan speed will be locked on

“low;” above 77ºF, the fan speed is adjustable.

Note: The exhaust hose is not required in

dehumidifying mode. Note that the internal

water tray will fill with water in this mode.

To set the temperature in cooling mode, use the up

“▲” and down “▼” buttons. The temperature setting

range is from 61

°

F- 89

°

F.

Note: When in dehumidifying or fan mode,

temperature setting is not required or allowed.

°

F

Note: Inital setting is in °F

The settings are toggled by the mode button

Note: All functions on this portable air

conditioner are controlled by the

remote. This remote accepts AAA

batteries

s

This unit has 3 settings:

ing

(Blue light)

Note: The unit does not need to be vented in

fan mode.

This unit has 3 fan speeds: High, Medium and

Low. Press the speed button to toggle the speeds.

Note: Fan speeds will not be displayed on the

control panel.

Temperature

Pressing this button will switch the temperature
read-out between ºC and ºF.

Setting the Timer

Cancelling the Timer

You may cancel the timer setting at any time by

pressing the cancel button or by pressing the

power button.

If the unit is on:

• Press the timer button.

• Use the up “▲” and down “▼” buttons to select a

time (displayed in hours).

• After the selected time elapses, the unit will

automatically shut off.

If the unit is off:

• Press the timer button.

• Use the up “▲” and down “▼” buttons to select a

time (displayed in hours).

• Then select which mode you want the unit to

automatically start in and make the necessary

adjustments.

• After the selected time elapses, the unit will

automatically turn on.

Note: The timer setting range is between 1 and

24 hours.

Operation

Mode Light

The light on the display panel on the portable air conditioner

changes color to indicate the mode (see next page for

more information):

• Blue: When the light is blue, the unit is in cooling mode.

• Orange: When the light is orange, the unit is in dehumidifying

mode.

• Green: When the light is green, the unit is in fan mode.

Air is circulated throughout the room. The compressor

does not turn on, so no air conditioning takes place.

Cooling

Cooling Mode

Fan Speed

Fan Mode (Green light)

Power control

Dehumidifying Mode (Orange light)

Fahrenheit/Celsius

Advertising