Eiki WL-30(XG-705A) - Manual (Page 22)

22
3.Names and Functions of the Operation Screen
r Real time Capture button
Capture (Project) the computer screen in real time. After capturing, the button will change
into the Stop Capture button. Click the Stop Capture button, then the projection will stop and
the screen will disappear.
t One-shot Capture button
Copy and capture (project) the computer screen without modification. After completing the
image transmission, the communication will stop and you can operate other functions.
y Easy Setting button
Configure the Wireless LAN settings just clicking this button. (The settings will be stored as
AdHoc system) For details, refer to “5. Wireless LAN Configurations”
➔ “Easy Setting”
(pp.36–37).
u Join the moderated session button
Enter the moderator’s group which is selected in the Network Projector List.
Advanced Settings
i Advanced Settings button*
Display the Advanced Settings.
o Quality selection
Select the speed and picture quality of the screen to capture.
Faster Speed ----- Screen capturing will be speedy but the picture quality will be lower.
Better Quality------ Screen capturing will be slower but the picture quality will be better.
!0 PJ Controller/Multi control button
Start up the operation screen of the projector. Refer to “10. How to Use the PJ Controller”
(pp.73–90).
!1 Create Nickname box
Create a nickname for each participant. When using moderator function, each computer’s
nickname (up to 16 characters) will be displayed on the client list of the moderator’s screen
allowing moderators to recognize the participants.
!2 Close button
Close Advanced Settings. (After closing the Advanced Settings menu, the settings you have
made in o !1 !5 will be effective.)
!3 Add NetworkModule button
When connecting the projector which is not displayed on the “Network Projector List“,
because it is separated by the router, click the button to set the connection. Refer to “4.
Wired LAN Configurations”
➔ “Confirming the Operation” (pp.28–29).
!4 Configure NetworkModule button
For setting the networks with the browser. Refer to “6. Configurations with Browser”
(pp.39–54).
!5 Set as Default Network Adapter box
When using multiple network adapters with a computer, check here then the selected
adapter will always be used with the software. After exiting the software, the selected
adapter will be cancelled.
!6 Check here when projecting layer window application pictures (for Windows only). This
function may affect some computer functions, and if so, please remove the checkmark.
*The o !1 !5 !6 settings you have made in i Advanced settings will not be effective until
closing the menu screen with !2 Close button.