Eiki WL-30(XG-705A) - Manual (Page 40)

40
6. Configurations with Browser
To operate by the browser, you need to prepare and configure the environment.
Check the environment of the browser and configure to operate the projector.
Browser is required to support the following version.
Microsoft: Internet Explorer Ver.4.0 or later
Netscape Communications: Netscape Communicator Ver6.0 or later
Browser Configuration
Configure the operating environment of the browser. Configuration has to be accurate for
proper operation.
Using Proxy Server
Internet Explorer
Start up Internet Explorer. Select “Tools”
➔ “Internet Options”. Select the “Connections” tab
and click the “LAN Settings” button in the “Local Area Network (LAN) Settings” field. Click the
“Advanced” button in the “Proxy Server” field. Enter the IP address set on the projector in the
“Do not use proxy server for addresses beginning with” field.
Netscape Navigator
Start up Netscape Navigator. Select “Edit”
➔ “Setup” ➔ “Category”. Select “Details” and
“Proxy”, and check on “Set proxy manually.” Click the “Display” button and enter the IP
address of the projector in the “Proxy server is not used at address starting from the following
IP address” field.
Not using Proxy Server
Internet Explorer
Start up Internet Explorer. Select “Tools”
➔ “Internet Options”. Select the “Connection” tab
and click the “LAN Setup” button in the “Local Area Network (LAN) Setup” field. Check off
“Proxy server is used at local address” of the “Proxy Server” field.
Netscape Navigator
Start up Netscape Navigator. Select “Edit”
➔ “Setup” ➔ “Category”. Select “Details” and
“Proxy”, and check “Connect Internet directly”.
Browser Environment
Introduction