Connecting and removing your battery, Charging your battery, No t f or co m m er cia l u se - e ric ss on in c – Ericsson T19LX User Manual

Page 16

Advertising
background image

12

Getting Started

No

t f

or

co

m

m

er

cia

l u

se

- E

ric

ss

on

In

c.

Connecting and Removing Your Battery

1 Place the battery over the back of the phone.

The label on the battery should face down.

2 Insert the top portion of the battery into the

phone. The tab on the bottom of the battery
should be pointing toward the bottom of
the phone.

3 Press down until you hear a click.

4 Remove the battery by pushing in on the tab

of the battery with your thumb.

5 Lift the battery up and out of the battery

cavity.

Charging Your Battery

To charge your battery, complete the appropriate charging procedure
described in this section.

Note!

Fully charge the battery before you use your phone.

The label on your phone box identifies the charger and battery
included in the package.

Note!

Never attach the charger to a phone that does not have a battery
installed.

Charge-Only Mode

If your phone is Off, attaching the charger will cause the phone to
activate in charge-only mode. When this mode is activated the
message

Charging only

appears in the display. Your phone is

now fast (rapid) charging the battery.

Note!

You cannot make or receive calls when your phone is in charge-
only mode.

Slow (Trickle) Charging a Deeply Discharged Battery

The battery may become deeply discharged (for example, when the
battery is stored for a long period). As a result, the phone may not
activate charge-only mode when the charger is connected.

1 Attach the charger to the phone for several hours to slowly

(trickle) charge the battery.

2 After trickle charging the battery for several hours the phone

should activate the charge-only mode automatically.

3 Continue charging the phone until the battery is fully charged.

Advertising