Call waiting, No t f or co m m er cia l u se - e ric ss on in c – Ericsson T19LX User Manual

Page 29

Advertising
background image

Basic Operations

25

No

t f

or

co

m

m

er

cia

l u

se

- E

ric

ss

on

In

c.

stored in the phonebook, the name stored with the phone number is
also shown when the call is received.

1 Open the flip to answer the call. If the flip has been deactivated in

the ANSWER OPT menu, answer the phone by opening the flip
and pressing

YES

. The words Incoming Call are replaced by

the call timer display.

2 When you finish your conversation, press

NO

or close the flip to

end the call.

Temporarily Muting the Ring Tone

To temporarily mute the ring tone without answering the call, press
either the upper or lower side key, or if the flip is open, press

NO.

Incoming Call

is still shown in the display, and you can still

answer the call by opening the flip or by pressing

YES

.

Note!

Do not use the

NO

key to mute the ringer if the flip is closed and

active. Opening the flip will answer the call. Pressing

NO

will end

the call.

Muting the Microphone During a Call

To mute the microphone during a call, press and hold the

CLR

key.

Mic Muted

appears in the display when the call is muted. Repeat

this procedure to return to your call.

Note!

If your flip has not been set to answer or end the call, then closing
the flip mutes the call, and opening the flip disables the mute and
resumes your call.

Increasing or Decreasing Ear Volume During a Call

To adjust the ear volume during a call:

Press the upper side key to increase the ear volume.

Press the lower side key to decrease the ear volume.

Call Waiting

If you have call waiting service from your service provider, press

YES

to answer a call when you receive the call waiting signal. You can
switch between the two calls by pressing

YES

. Do not press

NO

until

you are ready to end both calls.

Unanswered Calls

Your phone's display shows the number of calls you have received
but did not answer. You can clear the number from the display by
pressing any key or by turning the phone Off.

If Caller Number Identification is available from your carrier,
unanswered calls will be stored in the Incoming Log of the
PHONE LISTS menu. To quickly access your Incoming Log,
press

YES

from the Missed Call Indicator screen shown below.

Note!

When the flip is open, pressing the upper or lower side key will
turn on the back light without clearing the display. This is useful
at night when checking for missed calls.

Advertising