Epson PL 735c - Manual (Page 22)

22
4. On the next screen, select the file you want to import and click
Open .
The names of all of the groups in the file are added to the
Connection Group list on the Advanced screen.
To connect to the projector from the new computer, follow the steps
beginning on page 17.
Using E-mail Alerts
You can set up e-mail alerts to warn you of problems with the
projector on either a wireless network or a wired LAN connection.
1. Do one of the following:
■ Insert the EPSON 802.11b wireless card and set up your
projector to work in Access Point mode.
■ Insert your LAN card and configure your projector for a
wired network.
2. Turn on your projector and remote control. Press the EasyMP
button on the remote control to switch to EasyMP. You see the
following screen:
3. Select Config in the lower right corner of the screen and press
Enter on the remote control.
Bernslip.fm Page 22 Friday, December 12, 2003 3:02 PM