EdgeStar DWP60ES - Manual (Page 10)

The phases are: Pre-wash , Wash , Rinse and Dry
6 r e h s a w h s i D r a t S e g d E
Operating Instructions
To get the best performance from your dishwasher, read all operating
instructions prior using it for the first time.
Throughout this manual, features and graphic depictions may vary from your
model.
1. Power Button: Press to turn the unit ON/OFF.
2. Power Light: Indicates when the ON/OFF Button has been pressed.
3. Washing Program Selector: Rotate the knob to select the desired wash cycle.
4. Start/Pause Button: Press to START, PAUSE, and RESTART the dishwasher.
5. Delay button: Press this button to DELAY start of wash cycle. Start time can be delayed in
2,4,6 or 8 hour increments.
6. Delay indicator Light: Indicates when the DELAY button has been pressed.
7. Rinse-Aid Warning light: Indicates when the rinse-aid dispenser is low.
8. Delay Time/Washing Phase indicator: This light will indicate which increment the START
time is delayed. Furthermore, when the dishwasher is operating this will indicate the phase of
the wash cycle.
.
2
1
3 4 5
6
7 8
Program Wash
Cycle When Cycle Should Used Estimated
Time Estimated
Water
Usage
Heavy For heavily soiled dishes or cookware with dried-
on or baked-on soils. Everyday dishes may be
included in this cycle. However, this cycle may not
remove burnt-on foods. 112 min. 4.7 gal
Normal For loads of everyday dishes, glasses, and
cookware with medium soils. 85 min. 3.8 gal
Eco For lightly soiled plates, glasses, bowls and pans. 77 min. 3.4 gal
Glass For lightly soiled glasses, crystal and fine china. 71 min. 2.9 gal
Speed This is a shorter cycle for lightly soiled loads that
do not need drying. 45 min. 3.3 gal
Soak For rinsing partial loads that will be washed later. 10 min. 0.7 gal
Selector
NOTE: Many dishes may have lighter soil than what the NORMAL cycle is
optimized for. Choosing a cycle other than NORMAL can save energy and water.