Electrolux LAVATHERM 59840 - Manual (Page 10)

1 time to end / error message
2 cycle phase status
3 options
4 warnings
5 spin speed selection
6 dryness selection
Before first use
WARNING!
If the appliance was not transported in an upright position, leave it to stand for 12
hours before connecting it to the electricity supply and using it for the first time,
so that the oil can flow back to the compressor. Otherwise the compressor could
be damaged.
In order to remove any residues which may have been produced during production,
wipe the dryer drum with a damp cloth or carry out a brief drying cycle (30 MIN)
with damp cloths in the machine.
10 Before first use