Ericsson LBI-38823D - Manual (Page 8)

DESCRIPTION
CONTROLS
ON/OFF
SWITCH The ON/OFF Switch is located on the battery pack.
Sliding this switch up to the ON position will supply
power to the radio from the battery pack. The radio
can be programmed to beep once after power is
applied, indicating it is ready for use.
PTT BUTTON
Push-To-Talk Pressing the PTT button (located on the side of the
radio) will key the radio’s transmitter and perform
the necessary steps to acquire a communication
channel.
SHIFT/CLR All alternate key functions are accessed by press-
ing the SHIFT/CLR button and then pressing the
desired function key.
Trunked - Pressing the SHIFT/CLR button twice
("double click") will invoke the CLEAR function
which is used to exit the Special Call mode and
return to the normal System/Group display.
Conventional - Pressing the SHIFT/CLR button
twice ("double click") will enable MONITORING the
channel for activity by unsquelching the receiver.
All transmissions will be heard, even if Channel
Guard protected.
8