EverFocus SPEED DOME EPTZ900 - Manual (Page 36)

4-35
ask you to enter the tour number you would like to run, and starts the tour after
pressing Enter. To preset a tour before running it is necessary.
Note: The difference between the One-way tour mode and To-and-fro tour mode is their
return modes. For example: There is a tour with 3 preset positions 1, 2 and 3. The camera
runs 1→2→3→1→2→3 in the One-way tour mode, and 1→2→3→2→1 in the To-and-fro
tour mode.
4.5. Alarm Link to a Position/Tour
The EPTZ900/500 has 4 alarm inputs that can be set to link to a position or a tour when
an alarm is triggered.
¾ Set an alarm link:
Press F1 to set an alarm link. Enter the alarm number, and then press Enter.
Switch the Joystick up/down to select a position or a tour, enter a position or tour
number, and then press Enter to confirm the alarm link setting.
¾ Delete an alarm link:
Press Clr + F1 to delete a link of alarm to position/tour.
4.6. Other operations
The EPTZ900/500 can work with a DVR that has PTZ control functions, and a
matching protocol. The available control functions depend on different DVRs.
The EPTZ900/500 can work with a keyboard that has PTZ control functions, and a
matching protocol. The available control functions depend on different keyboards.