EPOS ELS Series - Manual (Page 5)

Design
2 ½ way floor standing bass
reflex
Power Handling
150 Watts speech & music
Frequency Response
48 Hz - 20 kHz
Impedance
4 Ohm nominal
Sensitivity
87 dB/1W/1m
Amplifier Compatibility
50 - 200 Watt
Positioning
20-50 cm (8-20 in) from rear wall
Tweeter
25 mm aluminium dome with
high temperature voice coil and
neodymium shielded magnet
system
Mid / Bass
130 mm polymer cone with high
temperature voice coil, injection
moulded PP cone mounted on an
inert die-cast aluminium chassis
Bass
130 mm polymer cone with high
temperature voice coil, injection
moulded PP cone mounted on an
inert die-cast aluminium chassis
Crossover
Multi-element medium order
Termination
Bi-wirable with quad terminals
that can be linked
Cabinet
15 mm HD chipboard wrap and
25 mm front baffle with vinyl
wood finish. Supplied with 6 mm
custom made spikes and should
be used bolted to ELS plinth
(bolts and plinth supplied)
Grille
Black cloth with Epos badge
Finishes
Light cherry / Dark cherry / Black
ash
Size (H x W x D)
850 x 175 x 195 mm
(34 x 7 x 7 ¾ ins) Includes grille
Weight
10 kgs / 22 lbs each speaker
Floorstanding Loudspeaker
SPECIFICATION