E&J METRO IC4 - Manual (Page 21)

000178 Revision B, March 006 • Metro IC4 Owner’s Manual 1
adjust calf pad position,
elevating legrest
(footplate extension
not shown)
calf pad
hinge plate slot
legrest tube stop
legrest tube
legrest calf
pad / hinge
plate assembly
adjust elevating legrest calf pad position
The legrest calf pad has three mounting positions one inch apart
on legrest tube. Refer to picture at right. To adjust:
1. Rotate calf pad/
hinge plate as-
sembly on legrest
tube so that
legrest tube stop
is in center of
hinge plate slot.
2. Slide calf pad
/ hinge plate
assembly up or
down on legrest
tube to desired
position.
3. Rotate calf pad /
hinge plate as-
sembly on legrest
tube so that
legrest tube stop
is aligned in desired position.
WARNING: Ensure that calf pads are locked in place
before occupying or operating wheelchair.