E&J METRO IC4 - Manual (Page 9)

000178 Revision B, March 006 • Metro IC4 Owner’s Manual 9
IV HandlInG tIps
The Everest & Jennings® Metro IC4 has been designed and engi-
neered to perform as a stable and well balanced unit when used for
its intended purpose. However, it is possible to tip the Metro IC4
over if it is used improperly. We urge you to learn the characteristics
of your wheelchair. It is most important to learn safe methods to
perform the daily activities basic to your lifestyle. Consult your medi-
cal professionals for assistance in developing the skills and proper
techniques to perform all activities safely.
BalanCe
Proper balance is the key to maintaining the stability of your wheel-
chair. Reaching, bending, and transferring to or from a wheelchair
will change the weight distribution and center of gravity of you and
your wheelchair. When performing such activities, do so as instruct-
ed in the following paragraphs to avoid tipping the wheelchair.
tRansfeR aCtIVItIes
WARNING: Always ensure that the wheelchair is on a stable,
level surface and engage wheel locks before
transfer.
WARNING: Do not step on the footplates; this could cause
the wheelchair to tip. Fold them up, and either
detach them, or swing them aside.
WARNING: There is a critical moment when there is little
or no seat platform beneath you. Take every
precaution to reduce this unsupported distance
before you attempt transfer.
Transferring into or out of a wheelchair is a very difficult maneuver.
Exercise extreme care when transferring without the aid of either an
attendant or a patient lift. Consult your physician, nurse, or physi-