Emerson ES27 - Manual (Page 18)

17
POP
TRACK MEMORY
2 4
6 8
9 10
• Any track can be programmed to play more than once.
• Repeatedly pressing the PROG / MEMORY button will enable you to check the
program if required.
LISTENING TO PROGRAMMED TRACKS
1.) Enter all tracks you want to program into memory following the procedures on
page 16.
2.) Press the PLAY / PAUSE button.
Disc play will start at the beginning of the
first programmed track.
“TRACK MEMORY” indicator appears
on the display.
TO CLEAR THE PROGRAM MEMORY
• Press PROG / MEMORY button to enter programming mode, then press the
STOP button.
• The program memory will also be cleared if the disc compartment is opened,
if the function is changed, or if the power is turned ‘Off’.
MUTE
• Press the MUTE button on remote control to switch off the sound, the MUTE
indicator will illuminate.
• Press MUTE again to restore the sound to the previous level. MUTE indicator
will extinguish.
STEREO HEADPHONE JACK
For private listening without disturbing others connect a set of stereo headphones
(not included) to the PHONES Jack on the back panel. The built-in speakers
automatically shut off when stereo headphones are connected to the headphone
jack. When using stereo headphones always start with the volume control set to a
low level and gradually increase until you find the desired level.
ES27_ib_drafts.p65 19/3/2002, 16:10 17