Enox EMX-830 - Manual (Page 31)

EMX-830
USER’S
MANUAL
When the driver installation is complete, the following
window will appear.
When the upgrade is complete, disconnect the set from the
PC. Refer to the “EMX-830 Safe Unplug/eject.”
● Do not disconnect the product from the PC while upgrade is
in progress.
● Save all the data on the product before initiating the firmware
upgrade.
● To check the Firmware information, choose Registration
Information on the menu. Also the information is displayed
during the boot process.
5
4
63
Link the product to a PC using the provided USB cable.
Choose [Start] [Programs] [MSC ] [EMX-830 ]
[Firmware Update]
For the users of Windows XP, choose “Automatic Software
Installation” and click on the Next button. 3
2
1
EMX-830
USER’S
MANUAL
62
Notice :