Enox EMX-830 - Manual (Page 32)

EMX-830
USER’S
MANUAL
● Power cannot be turned on.
– Check if the battery is properly aligned to the correct polarity.
● In case of no sound
– Check if the volume is set to ‘0.’
– Check if the connection of the earphone has failed.
● Buttons don’t work
– Check if the Hold switch is on.
● In case of “No Marked Files” or “No Marked Folder”
– Choose the “Total” mode of [Playing Methods]
– For more details, refer to the Playing Methods of this guide.
● In case of no FM reception
– For a fringe area where reception is poor, some radio signals
are hard to pick up.
– Check if the connection of the earphone has failed. (The
earphone doubles as the antenna for the product.)
● The system seems sluggish
– Booting speed will be slow when there are too many files in
EMX-830 Series.
– Refer to the page 30, “Preparations.”
65
* Installation software for Mac users is not provided.
EMX-830
USER’S
MANUAL
64
Product Specification Troubleshooting Checklist
Model EMX-830 Series
Memory 128MB/256MB/512MB/1024MB
File Support MPEG 1/2/2.5 Layer 3(8~ 320kbps, VBR)
WMA (5~192kbps) support
Battery One AAA (1.5V)
USB USB2.0
Playing Time About 20 hours
LCD Graphic LCD (3Line) / EL Backlight
Size 22 x 53 x 22mm
Weight 22.4g
S/N Ratio 90dB
Earphone Output 10mW + 10mW (16Ω)
FM Frequency 87.5~108MHz
Recording
VOICE / FM /Line-In Recording
Language Multiple language support (Unicode 2.0 Standard)
OS Windows 98SE / ME / 2000 / XP / MAC