Specifications, Model numbers systems, Model numbers – Exmark E-Series User Manual

Page 15: Systems

Advertising
background image

Specifications

Specifications

Model Numbers

Serial Nos: 920,000 and Higher

PNE22KA482; PNE24KA522

Systems

Engine

Engine Specifications: See your Engine Owner’s
Manual

Engine Oil Type: Exmark 4–Cycle Premium
Engine Oil

RPM: Full Speed: 3600 ±50 RPM (PTO not
engaged) Idle: 1500 ±100 RPM

Fuel System

Capacity: 7.0 gal. (26.5 L)

Type of Fuel: Regular unleaded gasoline, 87
octane or higher; containing no more than 10%
methanol or ethanol.

Fuel Filter:

Kawasaki: Kawasaki P/N 49019-7005

Fuel Shut-Off Valve:

All Units: 1/4 turn increments (“ON”, “OFF”).

Electrical System

Charging System: Flywheel Alternator

Charging Capacity: 15 amps

Battery Type: BCI Group U1

Recommended Minimum Battery CCA: 260 CCA

Battery Voltage: 12 Volt

Polarity: Negative Ground

Fuses:

All units:

– 25 amp main fuse

– 25 amp charging system fuse

– 10 amp PTO fuse

– 15 amp accessory fuse

Safety Interlock System

PTO must be disengaged, brake engaged, and
motion control levers out (neutral lock) to start
engine. (It is not necessary for the operator to be
in the seat to start the engine.)

Operator must be in seat when PTO is engaged,
brake is disengaged, or motion control levers are
moved in or engine will stop.

Engine will stop if either the left, the right, or
both levers are moved from neutral lock position
while brake is engaged.

Operator Controls

Steering and Motion Control:

Note: Motion control levers are adjustable to
three heights.

– Separate levers, on each side of the console,

control speed and direction of travel of the
respective drive wheels.

– Steering is controlled by varying the position

of the levers relative to each other.

– Moving motion control levers outward (in

slots) locks the drive system in neutral.

PTO Engagement Switch: Engages electric clutch
(to drive belt) which engages mower blades.

Parking Brake Lever: Engages parking brake.

Deck Height Adjustment Lever: Sets cutting
height to desired position.

Deck Lift Pedal: Foot pedal that lifts deck.

Transport Lock: Latching position: Automatically
latches at the transport position.

Seat

Type: Standard seat with foam padded seat
cushion with armrests and integral safety switch.

Optional seat: Seat with high back, extra
wide foam padded seat cushion with internal
suspension, thick bolstering, two-tone cover,

15

Advertising