Dimensions, Specifications – Exmark E-Series User Manual

Page 16

Advertising
background image

Specifications

armrests, integral safety switch, and seat vibration
isolation system.

Optional seat accessories for units with standard
seats:

– Custom ride suspension system to enhance

Standard Seat. Adds approximately 3 inches
(7.6 cm) to seat height.

– Deluxe suspension seat with high back,

(dampened, adjustable spring suspension),
armrests, and integral safety switch. Adds
approximately 1/2 inch (1.3 cm) to seat height.

Mounting: Adjustable fore and aft on seat tracks.

Armrests: Molded flip-up armrests.

Seat Safety Switch:

Integrated seat switch. Time delay seat switch
eliminates rough ground cut-outs.

Hydrostatic Ground Drive System

Two unitized hydrostatic transmissions:

Hydro Gear ZT2800

Hydraulic Oil Type: Exmark Premium Hydro Oil.

Hydraulic Oil Capacity: 77 oz (2.3 L) per side

Hydraulic Filter: P/N 109-3321

Speeds:

– 0-7 mph (11.3 km/hr) forward.

– 0-4 mph (6.4 km/hr) reverse.

Drive wheel release valves allow machine to be
moved when engine is not running.

Tires & Wheels

Drive

Front Caster

Pneumatic (Air

filled)

Pneumatic (Air
filled)

Quantity

2

2

Tread

Turf Master

Smooth

Size

20 x 8.00-10

13 x 5.00-6

Ply Rating

4

2

Pressure

13 psi (90 kPa)

13 psi (90 kPa)

Cutting Deck

Cutting Width:

– 48 inch Deck: (121.9 cm)

– 52 inch Deck: (132.1 cm)

Discharge: Side

Blade Size: (3 ea.)

– 48 inch Deck: 16.25 inches (41.3 cm)

– 52 inch Deck: 18.00 inches (45.7 cm)

Blade Spindles: Solid steel spindles with .67 inch
(17 mm) I.D. bearings.

Deck Drive: “B” Section belt with self-tensioning
idler.

Electric clutch: 125 ft-lb Mag Stop

Deck: Full floating deck is attached to out-front
support frame. Anti-scalp rollers provide
maximum turf protection. Deck design allows for
bagging, mulching or side discharge.

– 48 inch Deck: 3 anti-scalp rollers

– 52 inch Deck: 3 anti-scalp rollers

Deck Depth:

– 48 inch Deck: 4.0 inches (10 cm)

– 52 inch Deck: 4.0 inches (10 cm)

Cutting Height Adjustment:

Foot activated lever is used to adjust the cutting
height from 1 1/2 inch (3.8 cm) to 5 inches (12.7
cm) in 1/4 inch (6.4 mm) increments.

Mulching Kit: Optional.

Dimensions

Overall Width:

48 inch Deck

52 inch Deck

Without Deck

44.1 inches
(112.0 cm)

44.1 inches
(112.0 cm)

Deflector Up

48.0 inches
(121.9 cm)

52.8 inches
(134.1 cm)

Deflector Down

59.2 inches
(150.4 cm)

64.0 inches
(162.6 cm)

16

Advertising