Electrolux EI24WC75HS - Manual (Page 6)

6
All of these conditions can be met by raising or
lowering the adjustable leveling legs.
To level the cabinet using the leveling legs:
1 Open the door and remove the toe grille by
gently pressing down on top edge to release
snaps and pull forward.
2 Close the door and use a flat-blade screwdriver
or ³⁄₈ inch socket wrench to raise or lower the
front rollers enough so you can use them to
help guide the wine keeper in position. Once in
position, raise the front rollers so they are not
touching the floor.
3 Turn the front leveling legs clockwise to raise
and counterclockwise to lower.
3 Ensure the door does not bind and the seal
touches the cabinet on all four sides.
4 Replace the toe grille by aligning hooks with
opening in front panel and snapping it into place.
Installation
NOTE
The front rollers should only be used to help
maneuver the wine keeper into it’s final location. To
slide straight back into a cabinet cut-out, you may
need to place some weight on the front panel using
your foot while pushing back on the unit.
Once in it’s final position, the rollers should be raised
so all of the wine keeper’s weight is supported by the
four leveling legs.