EnGenius Technologies ESR-9710 - Manual (Page 64)

ESR-9710 Wireless N Gigabit Router Version 1.0
64
6.3.14 Advanced Network (UPNP, WAN Ping…)
ƒ In this section you can configure the UPNP, WAN Ping, WAN port speed, multicast
streams, and PPPoE pass-through settings.
ƒ Enable UPNP: Place a check in this box to enable UPNP. UPnP is short for
Universal Plug and Play, which is a networking architecture that provides
compatibility among networking equipment, software, and peripherals. This router
has optional UPnP capability, and can work with other UPnP devices and software.
ƒ Allow Users to disable Internet Access: Place a check in this box if you would like
to allow to user to terminate the WAN session.
ƒ Allow Users to modify Virtual Server Mappings: Place a check in this box if you
would like the users to add, modify, or delete server mapping entries.
ƒ Enable WAN Ping Respond: Place a check in this box if you would like this device
to be pinged from the WAN side.
ƒ WAN Ping Inbound Filter: You may select the computer that may ping this device
from the WAN side.
ƒ WAN Port Speed: You may select a WAN port speed from the drop-down list. It is
recommended that you select Auto.