EnGenius Technologies ESR-9710 - Manual (Page 70)

ESR-9710 Wireless N Gigabit Router Version 1.0
70
ƒ Please wait while the system is rebooting.
Note: Do no un-plug the device during this process as this may cause permanent
damage.
6.4.3 Firmware Upgrade
ƒ Click on the Firmware link in the navigation menu. This page allows you to upgrade
the firmware of the device in order to improve the functionality and performance. This
page also displays the current firmware version and its release date.
ƒ Ensure that you have downloaded the appropriate firmware from the vendor’s
website. Connect the device to your PC using an Ethernet cable, as the firmware
cannot be upgraded using the wireless interface.
ƒ Click on the Browse button to select the firmware and then click on the Upload
button.
6.4.4 System Logs
ƒ Logs display a list of events that are triggered on the Ethernet and Wireless interface.
This log can be referred when an unknown error occurs on the system or when a
report needs to be sent to the technical support department for debugging purposes
ƒ Enable Logging to a Syslog Server: Place a check in this box to enable syslog
logging.
ƒ Syslog Server IP Address: Specify the IP address of the syslog server.
ƒ Click on the Save Settings button once you have modified the settings.