Switching off the dishwasher, Emptying the dishwasher – Electrolux 40300 User Manual

Page 22

Advertising
background image

Operating Instructions

22

Interrupting the wash programme by opening the door of the dish-
washer

1

Hot steam may escape when the door is opened. Open the door care-
fully.

0

1. Open the door of the dishwasher. The wash programme stops.

2. Shut the door. The wash programme continues.

Switching Off the Dishwasher

When the wash programme is finished:

0

1. Turn the programme selector to the I position. Power indicator light

goes out.

1

Hot steam may escape if the door is opened immediately after the end
of the programme.

2. Open the door carefully.

Emptying the Dishwasher

3

• The dishes should therefore be allowed to cool down before removing

them from the appliance, as hot dishes can be sensitive to knocks.

• Leave the dishes in the dishwasher for approx. 15 minutes after the

end of the programme so that they dry better and can cool down.

• Empty the lower rack first, then the upper rack. This will avoid any

water left on the upper rack dripping onto the dishes in the lower
rack and causing water spots.

Advertising