Epson C82362 - Manual (Page 200)

11-4 EPSON Status Monitor 2 (Windows only)
R4C3610 Adm/G
Rev. C
A5 size CHAP11.FM
8/4/00 Pass 0
L Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
Local Printer
Connect the printer directly to the printer port of your computer.
For Windows 98/95:
You need to set the bidirectional support in the printer’s
properties dialog box. Click the Details tab and click Spool
Settings. Click the Enable bidirectional support for this printer
radio button.
Note:
When you monitor a local printer with Windows 98/95, use LPT1 for
the printer port.
LPR printer
LPR printers use LPR over TCP/IP as their communication
protocol suite, and you must install both protocols to use the
Status Monitor to monitor a LPR printer. To connect to a printer
on the network and share the printer without using the server:
For Windows 98/95:
You need to set the printer using EpsonNet Direct Print. See
“Setting Up Your Printer” on page 10-3.
For Windows 2000/NT 4.0/NT3.51:
You need to set for TCP/IP printing. See “Installing TCP/IP
Protocols in Your PC” on page 2-2.
The EPSON Status Monitor 2 can also monitor lpr printers added
by EpsonNet Direct Print.
Windows 98/95 Windows 2000/
Windows NT 4.0 Windows NT 3.51
Bidirectional support
is necessary. No special settings. Not able to monitor.