Epson C82362 - Manual (Page 22)

1-4 Getting Started
R4C3610 Adm/G
Rev. C
A5 size CHAP1.FM
8/4/00 Pass 0
L Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
10BASE-T (C82362 ✽ only)
Connect the Ethernet twisted-pair (10BASE-T) cable to the RJ-45
connector on the interface card.
10BASE-T/100BASE-TX (C82363 ✽ and C82364 ✽ )
Connect an Ethernet twisted-pair (Category-5) cable to the RJ-45
connector on the interface card. You can use this cable for both
10BASE-T and 100BASE-TX.
DC-IN connector (C82364✽ only)
Connect the AC adapter to the interface card.
c
Caution:
❏ Attach only one cable at a time.
❏ For interface card models C82363✽ and C82364✽ , use a
Category-5 shielded twisted-pair cable to connect the
interface card, to prevent malfunctions.
Power select switch
There is a power select switch on the board of interface card
models C82363✽ and C82364
✽ .
c
Caution:
The default position is at P for C82363✽, and at A for C82364
✽ .
Do not change the position of the switch. You must use the default
position. Otherwise, the interface card will not work correctly.
The power select switch for model C82363 ✽