Hotpoint EG21 & EG22 - Manual (Page 28)

28
Installation
After installation, check for gas soundness.
Fit the hotplate burner bodies, burner port rings, enamelled discs
and pan supports referring to the instructions for use where
necessary.
1. Check that the hotplate burners ignite correctly and burn with a
steady flame. Check for a steady flame on the low setting.
2. Check that with the oven set to 230˚C, the oven fan operates
and the oven heats up.
3. Check that the grill heats up.
Instruct the user on the operation of the cooker.
Operational
Checks
This appliance conforms to the following EEC Directives:
Low Voltage Equipment Gas Appliances
73/23/EEC 90/396/EEC
93/68/EEC 93/68/EEC
Electromagnetic Compatibility
89/336/EEC
92/31/EEC
93/68/EEC
DISPOSAL OF COOKER
To minimise the risk of injury to children please dispose of your product carefully and
safely. Remove all doors and lids (where fitted). Remove the mains cable (where fitted)
by cutting off flush with the appliance and always ensure that no plug is left in a condition
where it could be connected to the electricity supply.
To help the environment Local Authority instructions should be followed for the disposal
of you product.