HONDA ODYSSEY Security System - Manual (Page 6)

6 © 2004 American Honda Motor Co., Inc. - All Rights Reserved.
4625020B
Insert the ignition key.
Observe that the system beeps
twice. The switching procedure is The result
AUTOMATIC MODE Not completed No beep
MANUAL MODE Completed Beep twice
System Controls
Turn the ignition key from the ON (II) position to the LOCK (0) position.
Remove the key from the ignition switch.
Arming Mode
(AUTOMATIC MANUAL)
Open a door or the tailgate and close it. (The EXIT delay starts.)
Check that the status LED blinks.
NOTE: Steps 3 thru 7 must be completed within 5 seconds.
Insert the ignition key.
Remove the ignition key from the ignition switch. (All the way out)
Insert the ignition key.
Remove the ignition key from the ignition switch. (All the way out)
1
2
3
4
5
6
7
LOCK
ON
within 5 seconds
4625030B
This section explains how to change the arming mode from AUTOMATIC to MANUAL.
4625051B
Status
LED