HP LASERJET 300 - Manual (Page 80)

● Content Orientation (portrait or landscape)
● Job Build combines multiple scans into a single job.
● Image adjustment
● Sharpness enhances text and graphic edges.
● Darkness
● Background removes a background that might be a result from copying color paper.
● Notification changes how you are notified of the status of the fax transmission (that is, if the
fax was sent or if an error occurred and the fax was not sent).
NOTE: Notification changes the notification setting for the current fax only.
4. When all settings are completed, touch OK to return to the Settings menu.
5. On the Settings screen, touch the Light or Dark arrow to adjust the lightness/darkness of the fax
you are sending.
6. When all settings are completed on the Settings screen, touch OK to return to the Fax screen.
7. Using the keyboard, enter a phone number. To enter additional numbers, touch Next Number and
continue entering numbers.
To remove a number from the list, use the arrow keys to highlight a number and then touch
Remove .
NOTE: If needed, enter a comma (,) to provide a two second pause after a prefix number (such
as a "9" or "0" ) to allow the internal phone system time to access an outside line before the
remainder of the number is dialed. To enter a comma, use the keypad on the control panel that
pops up when you touch the Recipient Number Entry Box
To enter a PIN as part of the recipient number, use the keypad on the control panel. Touch the
Recipient field, and then touch the PIN button. This inserts a left bracket ([). Type the PIN, and
then touch the PIN button again to insert the right (]) bracket. The number within the brackets is
not displayed in the fax number that appears on fax reports.
8. Touch Start to send the fax. You can either touch the Start icon on the touch screen or press the
green Start button on the control panel.
9. If the fax recipient number matches one or more saved speed dials, the matched speed dials are
displayed and you are asked if you want to continue sending the fax to the indicated recipient(s).
Touch
Yes to confirm the number and send the fax, or touch No to cancel the fax. Note that this
step is not required if the Fax Number Speed Dial Matching feature is disabled.
If the fax recipient number does not match any saved speed dials, a number confirmation screen
appears and you must re-type the fax number. After re-typing the number, touch
OK to send the
fax. Note that this step is not required if the Fax Number Confirmation feature is disabled.
NOTE: If you have made any changes to the settings on the Settings screen (such as changing
notification or 1-sided to 2-sided), a Processing Job screen displays asking "Would you like to keep your
current settings?". If you press
Yes , the MFP returns you to the Fax screen and the settings you made
are retained. This allows you to send another fax using the same settings. If you press No , the settings
are cleared (returned to their default values) and the MFP home screen displays.
72 Chapter 3 Use Fax ENWW