HP LASERJET 300 - Manual (Page 99)

Scheduling fax printing (memory lock)
Use the fax printing feature to specify when faxes print. There are three fax printing modes that can be
selected. The selections are
Store all received faxes , Print all received faxes , or Use fax printing
schedule .
If Store all received faxes is selected, then all incoming faxes will be stored in memory and not printed.
It is possible to access fax jobs stored in memory through the MFP Retrieve Job menu. Using this menu,
you can print or delete print jobs while they are stored in memory. For additional information about this
feature, see the Retrieve Job menu description in the MFP user guide.
NOTE: The MFP Retrieve Job option is only available to the HP LaserJet 4345mfp and the HP Color
LaserJet 4730mfp, 9040/9050mfp, and 9500mfp. For the HP LaserJet M3035 MFP, M3027 MFP, M4345
MFP, M5025 MFP, M5035 MFP, M9040 MFP, M9050 MFP and HP Color LaserJet CM4730 MFP and
CM6040 MFP Series, retrieved stored faxes can be accessed by entering the
Fax Printing menu and
changing the mode to Print all received faxes .
If Print all received faxes is selected, then all incoming faxes will be printed. Any faxes that are currently
stored in memory will also be printed.
If Use fax printing schedule is selected, then faxes will be only printed per the fax printing schedule. The
fax printing schedule can be set to lockout an entire day (24 hours) or lockout a time period during the
day. Only one lockout period can be set, but it can be applied to any number of days. The lockout period
is setup under the
Fax Printing menu. For more information, see Create a fax printing schedule
on page 93 .
NOTE: When the lockout time ends, any faxes that were received and stored during the lockout period
are printed automatically.
Fax-printing behavior
To increase fax security, the behavior of the Fax Printing feature changed with the release of the HP
LaserJet M5035 MFP, M5025 MFP, M3035 MFP, M3027 MFP, M4345 MFP, M9040 MFP, M9050 MFP
and HP Color LaserJet CM4730 MFP and CM6040 MFP Series. The key differences are how call
reports, T.30 reports, report menus, and the control panel status line are handled or displayed. The
following table assumes that Fax Printing is enabled.
Menu setting for
call report and/or
T.30 Report When fax is
received, how are
call report/T.30
report handled? What happens
when a stored fax
is printed? What happens to
menus for fax
reports & T.30
report? Does the control
panel show
incoming
telephone
number?
Legacy MFP
Operation (9500,
9040/50, 4345,
4730) Never Not printed Fax prints Shown Yes
Every fax Not printed Fax prints Shown Yes
M5035, M5025,
M3035, M3027,
M4345, M9040,
M9050, CM4730,
CM6040 MFPs Never Not printed Fax prints Hidden Hidden
Every fax Not printed and
stored with fax Fax prints, call
report(s) prints Hidden Hidden
ENWW Scheduling fax printing (memory lock) 91