Halfords Bicycle Accessories User Manual
Page 5
STEP 6 Attach the wheels to the quick-release brackets and make sure they are secure
6A
6B
6C
6A.
Locate the rear wheel brackets on each side of the trailer and read the warnings carefully.
6B.
Push one wheel axle completely through the bracket hole until you hear the axle click into place.
6C.
IMPORTANT! Pull firmly on each wheel to ensure the lock mechanisms are securely engaged!
STEP 7 Extend and secure the tow bar
7A
7B
7C
7D
7A.
Lay the trailer on its side with the tow bar at the top and undo the lock pin from the bracket.
7B.
Pivot the tow bar all the way forward until the shaft comes to rest in the front part of the bracket.
7C.
Insert the lock pin shaft all the way through the forward holes in the bracket and tow bar.
7D.
Hook the loop over the end of the shaft and make sure the pin is secure.
Bracket
D
8
C
8
B
8
A
8
STEP 8 Coupler attachment for bikes with rear hub nuts.
(Note: If your bicycle rear wheel has a quick-release rear axle please proceed to Steps 10 & 11)
8A.
Loosen the rear bike hub nut with a wrench.
8B.
Remove the hub nut and washer from the bike.
8C.
Position the coupler plate over the axle. Replace the bike hub nut and washer and tighten by hand.
8D.
Tighten the bike hub nut securely with a wrench.